|Maximum Recommended Panel Power||50W|
|Rated Battery (Output) Current||4A|
|Nominal Battery Voltage||12V|
|Max Input Voltage||27V|
|Recom. Max Panel Voc at STC||22V|
|Minimum Battery Voltage for Operation||7.2V|
|Input Voltage Range||0-27V|
|Maximum Input Short Circuit Current||4A|
|Maximum Input Current**||7A|
|Charge Profile||Multi-Stage with Temperature Compensation|
|Absorption Time||2 Hours|
|Charging Output Voltage Range||7.2-18V|
|Charging Output Voltage Range||7.2-18V|
|Battery Temperature Compensation||-28mV/°C|
|Operating Temperature||-40°C - 85°C|
|Maximum Full Power Ambient||50°|
|Electrical Efficiency||96%-99.85% typical|
|Tracking Efficiency||99% typical|
|MPPT Tracking Speed||15Hz|
|Night Consumption||0.09mA (90uA)|
|Environmental Protection||IP40 (Terminals Nickel Plated)|
|Connection||4-position terminal block for 12-30AWG wire|
|Weight||2.8 oz., 80g|
|Dimensions||4.3 x 2.2 x 0.9", 11 x 5.6 x 2.5 cm|
Genasun controllers are deployed to the most remote locations on earth. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper atmosphere on solar powered airplanes, and in a few off-the-map locations. Made in the USA, each controller is put through complete electrical testing to ensure reliability. If you need mission-critical power, this is your controller.
Genasun’s Ceramic controllers set a new benchmark for reliability. Traditional controllers have components filled with fluid electrolytes that boil off over time, causing system failure. Genasun Solid Ceramic controllers have no fluid. They don’t wear out in the heat. Backed by an industry leading 10 year warranty, these controllers take reliability to a new level.
Not all Maximum Power Point Tracking controllers were created equal. Most use a sweep and sleep method that scans the entire voltage range every 30-60 seconds. That's okay for a clear day, but traditional controllers are constantly off target during changing cloud conditions – exactly when power is scarce and is needed the most. Genasun controllers adapt to changing light conditions 20 times every second. They are always on target, capturing every bit of available sunshine. Simply put, other controllers can't keep up.
Our Lithium charging algorithms draw from nine years of experience building Lithium battery packs for harsh environments. We've worked with every chemistry, and have tailored charge profiles to help you get more capacity and cycle life from your battery pack.
Genasun stocks the GV-4 in a variety of charge profiles for the most common Lithium chemistries and cell configurations. Custom voltages can be programmed at the factory to match the Float Voltage (CV voltage) of your battery. To order a Custom Voltage controller, hit the "Customize" button in the e-commerce page and select the custom voltage from the drop down. For further information email techsupport @ blueskyenergyinc.com.
Every controller uses power. While a typical PWM controller burns 9mA, the Genasun GV-4 burns a scant 0.125mA. That slow burn is perfect for waiting out a snow-covered panel, or a few bad weeks of clouds.
Genasun controllers shine in partial shade. The 50% power increase from Genasun’s advanced MPPT is often enough to prevent system downtime from partial shade. From street signs and tree branches, to coffee cups and stickers placed on panels by pedestrians, Genasun MPPT keeps partially shaded solar panels generating more power than any other controller.
Life is unpredictable. PWM controllers amplify that unpredictability. A small amount of shade can drop PWM power output to 2/3's of what a Genasun MPPT controller can draw from the same panel. By constantly adapting to changing light conditions, Genasun’s advanced MPPT controllers provide a steadier source of power, keeping your system running in uncertain weather.
Most MPPT solar charge controllers broadcast Radio Frequency noise from the DC/DC conversion circuit. Unfiltered inputs and outputs waste energy and interfere with nearby or attached electronics. Genasun worked to eliminated RF emissions from our line of charge controllers. During third-party testing for FCC compliance, the test engineer asked us, “Is it on?”. Mission accomplished.
Fans get clogged with dust and dirt. Relays eventually stop switching. Genasun controllers use advanced electrical design that obsoletes these parts. With fewer moving parts to wear out, Genasun controllers outlast the competition.
The industry's most efficient boost controllers. These controllers boost lower-voltage solar panels up to charge higher-voltage lead-acid batteries up to 48V nominal 8A 12/24/36/48V Boost...View full product details
A perfect match for your 140W panel. The ultra high-speed MPPT in the GV-10 is so effective it reduces your system cost per Watt. 10.5A...View full product details
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View...View full product details