Genasun GV-10 140W 10.5A | Solar charge controller with MPPT

Genasun

16294503186504

1 item left

A perfect match for your 140W panel. The ultra high-speed MPPT in the GV-10 is so effective it reduces your system cost per Watt.

10.5A 12V MPPT Controller

  • 98.3% Peak Efficiency
  • High-Speed MPPT
  • Advanced electronic protection
  • Tiny self-consumption (0.9mA)
  • IP40
  • 5 Year Warranty
  • Compatible with lithium and lead-acid batteries

For Lead-acid Batteries

GV-10-Pb-12V
Maximum Recommended Panel Power 140W
Rated Battery (Output) Current: 10.5A
Maximum Input Short Circuit Current*: 10.5A
Minimum Battery Voltage for Operation 8.5V
Input Voltage Range 0-34V
Maximum Input Current*: 19A
Charge Profile: Multistage with Temperature Compensation
Rated Battery (Output) Current 10.5A
Nominal Battery Voltage 12V
Absolute Max Panel Voltage (Voc) 34V
Recommended Max Voc at STC 27V
Charging Voltages FLOODED Setting SEALED Setting
Equalization Voltage 15.0V -
Equalization Time 2 Hours -
Equalization Interval 30 Days -
Bulk Voltage 14.6V 14.3V
Absorption Voltage 14.4V 14.1V
Absorption Time 2.5 Hours
Float Voltage 13.5V
Battery Temperature Compensation -28mV/°C
Operating Temperature -40°C - 85°C
Maximum Full Power Ambient 70°C
Electrical Efficiency 96%-98% typical
Tracking Efficiency 99+% typical
MPPT Tracking Speed 15Hz
Night Consumption 0.09mA (900uA)
Environmental Protection IP40 (Terminals Nickel Plated)
Connection 4-position terminal block for 12-30AWG wire
Certifications cETLus Safety, Recognized Component cETLus HazLoc (C1D2), CE, FCC, RoHS
Weight 6.5oz., 185g
Dimensions 5.5x2.5x1.2", 14x6.5x3.1cm
Warranty

5 Years

 

For Lithium Batteries

GV-10-Li-12.5V GV-10-Li-14.2V GV-10-Li-16.7V
Maximum Recommended Panel Power 120W 140W 160W
Rated Battery (Output) Current 10.5A
Absolute Max Panel Voltage (Voc) 34V
Recommended Max Voc at STC 27V
Minimum Battery Voltage for Operation 8.5V
Input Voltage Range 0-34V
Maximum Input Current*: 19A
Charge Profile: CC-CV
Maximum Input Short Circuit Current*: 10.5A
Charging Voltages -
Equalization Voltage -
Equalization Time -
Equalization Interval -
Bulk Voltage -
Absorption Voltage -
Absorption Time -
Float Voltage 12.5V 14.2V 16.7V
Battery Temperature Compensation disabled
Operating Temperature -40°C - 85°C
Tracking Efficiency 99+% typical
Electrical Efficiency 96%-98% typical
MPPT Tracking Speed 15Hz
Night Consumption 0.09mA (900uA)
Environmental Protection IP40 (Terminals Nickel Plated)
Connection 4-position terminal block for 12-30AWG wire
Certifications cETLus Safety, Recognized Component cETLus HazLoc (C1D2), CE, FCC, RoHS
Weight 6.5oz., 185g
Dimensions 5.5x2.5x1.2", 14x6.5x3.1cm
Warranty 5 Years

 

Surviving the Storm with Low Power Burn

Every controller uses power. While a typical PWM controller burns 9mA, the Genasun GV-10 burns a scant 0.125mA. That slow burn is perfect for waiting out a snow-covered panel, or a few bad weeks of clouds.

Radio Silence

Most MPPT solar charge controllers broadcast Radio Frequency noise from the DC/DC conversion circuit. Unfiltered inputs and outputs waste energy and interfere with nearby or attached electronics. Genasun worked to eliminated RF emissions from our line of charge controllers. During third-party testing for FCC compliance, the test engineer asked us, “Is it on?”. Mission accomplished.

No Fans. No Relays.

Fans get clogged with dust and dirt. Relays eventually stop switching. Genasun controllers use advanced electrical design that obsoletes these parts. With fewer moving parts to wear out, Genasun controllers outlast the competition.

Fault Tolerance

Reverse polarity protection on battery and panel

Internal user-replaceable fuse


    Collections: Solar Controllers

    Category: 65-140 Watts, Genasun, Lead Acid, Lithium

    Type: Solar Controller


    Related Items