The MS Series Inverter/Charger – a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.
Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
Download Owners Manual
Download Spec Sheet
| Output Power | 
2,000W | 
| Peak Watts | 
3,300W | 
| Warranty | 
3 Years | 
| Output Voltage | 
120 VAC | 
| Output Peak | 
50amps | 
| Output Current | 
17amps | 
| Output Waveform | 
Pure Sine | 
| Output Frequency | 
60 Hz | 
| Input Voltage | 
12 | 
| Continuous Output Amps | 
17amps | 
| UL Certified | 
Yes | 
| Phase | 
Single | 
| Topology | 
Low Frequency |