sales@4thdsolar.com
16210460147784
Sold Out $1,603.19
The MS Series Inverter/Charger – a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.
Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
Output Power | 2,800W |
---|---|
Peak Watts | 3,900W |
Warranty | 3 |
Output Voltage | 120 VAC |
Output Peak | 70amps |
Output Current | 23amps |
Output Waveform | Pure Sine |
Output Frequency | 60 Hz |
Input Voltage | 12 |
Continuous Output Amps | 23amps |
Operating Temp | -20° C to +60° C (-4° F to 140° F) |
Efficiency | 88% |
Weight | 55 |
Dimensions | 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
UL Certified | Yes |
Phase | Single |
Topology | Low Frequency |
Input Battery Voltage Range | 9-17 |
The MS Series Inverter/Charger – a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.
Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
Output Power | 2,800W |
---|---|
Peak Watts | 3,900W |
Warranty | 3 |
Output Voltage | 120 VAC |
Output Peak | 70amps |
Output Current | 23amps |
Output Waveform | Pure Sine |
Output Frequency | 60 Hz |
Input Voltage | 12 |
Continuous Output Amps | 23amps |
Operating Temp | -20° C to +60° C (-4° F to 140° F) |
Efficiency | 88% |
Weight | 55 |
Dimensions | 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
UL Certified | Yes |
Phase | Single |
Topology | Low Frequency |
Input Battery Voltage Range | 9-17 |
Sold Out $1,815.82
The MS-PAE 120/240V Series Inverter / Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications....
View full product detailsSold Out $1,767.22
The MS-PAE 120/240V Series Inverter / Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications....
View full product detailsSold Out $1,813.39
The MSH-M Series Inverter / Charger from Magnum Energy – a pure sine wave inverter designed with true hybrid technology allowing it to run larger loads from...
View full product details
© 2025 4thDsolar.